CAUTION
Read Rules for Safe Operation and Instructions Carefully.
WARNING
1. Suitable for use with solid-state speed controls.
2. This appliance has a polarized plug (one blade is wider than the other). To
reduce the risk of electric shock, this plug is intended to fit in a polarized outlet
only one way. If plug does not fit fully in the outlet, reverse the plug. If it still
does not fit,contact a qualified electrician. Do not attempt to defeat this safety
feature.
3. DO NOT use fan in window. Rain may create an electrical hazard. Do not leave
the fan operating adjacent to an area where water has collected to avoid the
potential of electrical hazard. Do not immerse unit, plug or cord in water or spray
with liquids.
4. Do not leave the fan running unattended.
5. Please make sure the voltage of the power supply is the same as shown on the
fan nameplate.
RULES FOR SAFE OPERATION
1. Never insert fingers, pencils, or any other object through the grille when fan is
running.
2. Disconnect fan when moving from one location to another.
3. Disconnect fan when removing grilles for cleaning.
4. Be sure fan is on a stable surface when operating to avoid overturning.
5. DO NOT use fan in window, rain may create electrical hazard.
6. Indoor use only.
IMPORTANT: During the first few minutes of initial use, you may notice a slight
odor due to lubrication of the motor at the factory. This is normal and will quickly
disappear.
PART FIGURE
Spinner
Front Guard
Fan Blade
Decorative Cover
Ring
Height Adjustment Ring
2
Plastic Nut
Rear Guard
Motor Shaft
Motor Housing
Power Cord
Control Knob
Screw
Inner Pole
Extension Pole Stand
Base
Screw