Installing The Batteries - Sunstech DTB4660HD Mode D'emploi

Installing the Batteries

Remove the battery cover from the rear of the Remote Control and place 2 x
AAA size batteries inside the compartment.
Please make sure the battery polarities match the polarity marking inside
the compartment.
1. Open the cover
Using the Remote Control
To use the Remote Control, point it towards the front of the Digital Set Top
Box. The Remote Control has a range of up to 7 meters from the Set Top Box
at an angle of up to 60 degrees.
DTB4660HD
The Remote Control will not operate if its path is blocked.
Sunlight or very bright light will decrease the sensitivity of the
Remote Control.
2. Install batteries
8
3. Close the cover