Led Display And Panel Control; Bluetooth Mode; Optical Mode; Coaxial Mode - CONTINENTAL EDISON CE60BS2 Guide D'utilisation

The symbols on screen show the main features of current working status
1. Long press – Power on/off
Short press – Play/Pause
2. Long press – decease volume
Short press – skip to previous track
3. Long press – Increase Volume
Short press – Skip to Next Track
4. Short press – audio source switching
5. LED display – the symbols on screen show the main features of current working status
 Turn on the sound bar and then switch to Bluetooth Mode, the icon "BLUE" on the LED display will
keep flashing
 Keep the sound bar and Bluetooth enabled device within 20~30 feet or less of each other during
paring process. Different environments may affect the transmission distance;
 Set your mobile phone or the Bluetooth enabled device to search for Bluetooth devices;
 When the Bluetooth enabled finds the speaker, select "CE60BS2" from the list of found devices;
 If required, enter the password "0000". Select OK or YES to pair the two units;
 After a successful pairing, the "BLUE" icon on LED display will stop blinking
 If the source of your devices has digital connectors, using them will improve the audio quality.
Optical cable is not supplied
 Remove the cap of the optical cable and check the direction of the plug before inserting it into the
connector.
 Connect the end of the optical cable to the rear of the sound bar and the other end to the optical
output of your TV (or digital device etc.).
 Turn on the sound bar and switch to OPTICAL mode
 If the source of your devices has digital connectors, using them will improve the audio quality.
Coaxial cable is supplied

LED DISPLAY AND PANEL CONTROL

BLUETOOTH MODE

OPTICAL MODE

COAXIAL MODE

28