Axis T8412 Guide D'utilisation page 11

AXIS T8412 User's Guide Page 11
IP Camera
With AXIS T8412 Installation Display you can connect to a camera either through Connect or
Device Search. If the IP address for the camera is not the default address expected, AXIS T8412 will
change its own IP address so as to enable the connection. This may take a few seconds to complete.
Connect
From one of AXIS T8412's LAN ports connect a network cable to the camera's network port. From
the Main menu tap IP Camera and Connect. Waiting will appear on the LCD display. When the
camera is connected successfully, its image will display in the screen.
Device Search
Device search can be used to find all cameras in a
local network or a single camera directly.
To find cameras on a local Network, connect AXIS
T8412 to the LAN with a network cable from one of
the LAN ports. Tap the Device Search icon to show
the list of cameras found. Tap the IP address of the
target camera, enter its Username and Password if
different from the default. Tap the Enter icon or the
CONNECT button. The camera's image will display in the screen.
Press the ESC key on the AXIS T8412 front panel to exit the viewing page.
Configure Root Password
This setting allows you to specify a password for the
user "root", which will be used to access all new or
factory defaulted cameras. If an individual camera
uses a different password, this should be directly
entered when accessing that camera instead.
Use the keyboard to tap in the Username and
Password and tap Set Password.