Error Signals - Salora DWR4200 Manuel De L'utilisateur

Problem
The dishesare
not drying

Error signals

When some malfunctions come on, the appliance will show a signal to warn you:
Signals
The Extra Drying light
flicker fleetly
The ECO and Extra Drying
light flicker fleetly
The Intensive
light flicker fleetly
The Rapid and Extra Drying
light flicker fleetly
The Rapid, Intensive
and Extra Drying
light flicker fleetly
The Rapid, Intensive,
ECO and Extra Drying
light keep lighting
WANING
If overflow occurs, turn off the main water supply before calling a service.
If there is water in the base pan because of an overfill or small leak,
the water should be removed before restarting the dishwasher.
Possible Causes
Wrong program has
been selected.
Use of cutlery with a
low-quality coating.
Meanings
Longer inlet time.
Not reaching required
temperature
Overflow.
Touch button adhesion
Communication anomaly
Water tank doesn't get
enough water within
3 minutes
34
What To Do
With a short program, the
washing temperature is lower,
decreasing cleaning performance.
Choose a program with a long
washing time.
Water drainage is more difficult with
these items. Cutlery or dishes of this
type are not suitable for washing in
the dishwasher.
Possible Causes
A flow meter, drain valve, or pump failure,
it should be repaired by a qualified worker.
Heating tube or thermistor anomaly,
it should be repaired by a qualified worker.
Some element of dishwasher leaks .
Water or other material in the key area
causes it or it should be repaired by a
qualified worker.
It should be repaired by a qualified worker.
It should be added more water until listening
a quick beep. Then press Start/Pause button
to make sure machine work properly.