Delay Start; Turning The Oven Light On And Off; Minimum And Maximum Settings - Samsung NE59M4310 Serie Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Operating the oven

Delay start

In a delay timed cooking, the oven's timer turns the oven on and off at times you
select in advance.
You can use the delay start with bake and self clean mode.
You can set the oven for a delay start before setting other cooking operations.
The clock must be set to the current time.
How to set the oven for delay start
1.
Position the oven rack(s) and place the food in the oven.
2.
Press the pad for the cooking operation you want, eg. Bake. The default
temperature is 350 °F.
3.
Use the
or
pad to enter the temperature you want, eg. 375 °F.
Press Cooking Time.
4.
5.
Enter the cooking time you want, eg. 45 min, using the
You can set the cooking time for any amount of time from 1 minute to 9 hours
and 59 minutes.
6.
Press Delay Start.
7.
Enter the time you want the oven to turn on, eg. 4:30, using the
(Set the Hour -> Press START/SET -> Set the Minute)
Press START/SET. At the set time, a short beep will sound. The oven will begin
8.
to bake.
28 English
NE59M4310_AA_DG68-00881A-00_EN.indd 28

Turning the oven light on and off

The oven light turns on automatically when the door is opened.
The oven light turns off automatically when the door is closed.
You can turn the oven light on and off manually by pressing the

Minimum and maximum settings

All of the features listed in the table below have minimum and maximum time
or temperature settings. A beep will sound each time a pad on the control panel
is pressed and the entry is accepted. An error tone will sound in the form of a
long beep if the entered temperature or time is below the minimum or above the
maximum setting for the feature.
FEATURE
or
pad.
Bake
Broil
Warming Center
or
pad.
Keep Warm
Self Clean
MINIMUM
MAXIMUM
175 °F (80 °C)
550 °F (285 °C)
LO
HI
-
3 Hr.
-
3 Hr.
2 Hr.
5 Hr.
pad.
11/14/2016 3:44:54 PM

Publicité

Table des Matières
loading

Table des Matières