SEVERIN BK 7300 Mode D'emploi page 12

adaptor ring must be used to stabilize the
bottles.
- Fit the holder insert with the spacers
facing downwards. The bottle tops with
teats are placed onto the holder insert.
- Place the lid onto the sterilizer.
- Now insert the plug into a wall socket
and switch on the unit. The heating
process begins and is indicated by the
indicator light.
- Wait until the unit has automatically
switched off and the indicator lamp has
gone out.
- Remove the plug from the wall socket
and allow the unit to cool down for
approx. 5 minutes before removing the
lid and taking out the bottles. Caution:
the bottles are still very hot.
General Care and Cleaning
Always remove the plug from the wall
socket and allow the appliance to cool down
sufficiently before cleaning.
To avoid the risk of electric shock, do not
G
clean the base unit with water and do not
immerse it in water. The inside may be
cleaned with a slightly damp, clean cloth.
Do not use abrasives or harsh cleaning
G
solutions for cleaning.
- Any lime deposits on the heating
element may be removed by using a
solution of 100 ml of water and half a
teaspoon of vinegar concentrate. Switch
on the appliance
attachments/inserts and remove the plug
from the wall socket after 5 minutes. Let
the solution take effect for approx. 10
minutes, then pour it away. Fill with 100
ml of fresh water and insert the plug into
the wall socket again. Once the unit is
automatically switched off, remove any
remaining water with a clean cloth.
- The lid and the inserts may be rinsed in
hot water. Make sure they are dried
thoroughly afterwards.
- For storage, place all parts inside the unit
and close it with the lid.
without any
Guarantee
This product is guaranteed against defects in
materials and workmanship for a period of
two years from the date of purchase. Under
this guarantee the manufacturer undertakes
to repair or replace any parts found to be
defective, providing the product is returned
to one of our authorised service centres. This
guarantee is only valid if the appliance has
been used in accordance with the
instructions, and provided that it has not
been modified, repaired or interfered with
by any unauthorised person, or damaged
through misuse.
This guarantee naturally does not cover
wear and tear, nor breakables such as glass
and ceramic items, bulbs etc. If the product
fails to operate and needs to be returned,
pack it carefully, enclosing your name and
address and the reason for return. If within
the guarantee period, please also provide the
guarantee card and proof of purchase.