Bed Of Ashes; Cleaning; Guarantee - EHV Kanuk 1 Mode D'emploi

DIRECTIONS OF USE

2.7 Bed of ashes

Remember to leave a 5-10 cm layer of ashes on the ground of the
combustion chamber. The bed of ashes will protect the ground
of the kiln from blowing. Remove only excess ashes with a shovel
every now and then. You can obtain the required accessories from
your Kanuk® co-contractor.

2.8 Cleaning

The gas leading parts of the Kanuk® hot-air kilns (baffl e plate,
butterfl y valve, etc.) and the connecting pieces need to be cleaned
in case of defi lement. Carry out a cleaning in all cases once during
and after the heating period. The sealing cord of the combustion
chamber door needs to be replaced in case of damage.

2.9 Guarantee

End consumers get a two-year guarantee. In case of commer-
cial use, the guarantee period is extended by 12 months. Viewing
panes and ceramic sealing cords are generally not included in
the guarantee. In case of damage, please contact your Kanuk®
co-contractor in fi rst instance. Photos of the blemished element and
the location of installation as well as the exhaust system are required in
general for handling cases of damage. Furthermore, please submit
the production number and a detailed description of damage. Ask
your co-contractor for the required form sheet.
Only original or spare parts accredited by the manufacturer may be
used. Wrong use and inobservance of this manual will abrogate the
warranty claim.
EHV GmbH • Entwicklung | Herstellung | Vertrieb • Hauptstraße 131 • 01744 Dippoldiswalde
22