Mounting on a table
1 Lift and tilt the TV into its upright position on a
table.
- Leave a 10 cm (minimum) space from the
wall for proper ventilation.
10 cm
2 Connect the power cord to a wall outlet.
CAUTION
y Do not place the TV near or on sources
of heat, as this may result in fire or other
damage.
Using the Kensington security system
(Only LN54/53**)
The Kensington security system connector is
located at the rear of the TV. For more information
of installation and using, refer to the manual
provided with the Kensington security system or
visit http://www.kensington.com.
Connect the Kensington security system cable
between the TV and a table.
ASSEMBLING AND PREPARING
Adjusting the angle of the TV to suit view
(Only LA61**)
Swivel 15 degrees to the left or right and adjust the
angle of the TV to suit your view.
15
CAUTION
y When adjusting the angle adof the product,
watch out for your fingers.
» Personal injury may occur if hands or fingers
y
are pinched. If the product is tilted too much,
it may fall, causing damage or injury.
<Rear>
17
15
<Front>