Safety Precautions - Aiwa LED-405FHDSMART Mode D'emploi

2
en
ENGLISH
Read these safety instructions before using your device and store them for posible future reference.
1. If the cord is damaged, have it repaired
by the manufacturer, its service or a
similarly qualified person in order to avoid
any hazard.
2. The power supply must be replaced by a
new one in case of malfunction, because
this power supply is not repairable.
3. The socket-outlet should be installed
near the equipment and should be easily
accessible.
4. The product is not intended for use by
persons (including children) with reduced
physical, sensory or mental capacity.
Persons who have not read the manual,
unless they have received explanations
by a person responsible for their safety
and supervision should not use this unit.
5. Children should be monitored to ensure
that they do not play with the product.
The cord should always be readily accessible.
6.
The apparatus should not be exposed to
7.
dripping or splashing of water or liquids
and no objects filled with liquids such
as flowers vases shall be placed on the
product.
8. Do not impede the normal ventilation of
the product when intended to use.
9. Always leave a minimum distance of 10
cm around the unit to ensure sufficient
ventilation.
10. Open flame sources, such as candles,
should not be placed on top of the device.
11. The device is intended for use only in a
temperate climate.
12. CAUTION:
Danger of explosion if battery is
incorrectly replaced or not replaced by
the same type or equivalent.
13. The battery should not be exposed to
excessive heat such as sunshine, fire or
similar.
14. Different types of batteries, new and
used batteries should not be mixed.
The battery must be installed
15.
according to the polarity.
16. If the battery is worn, it must be removed
from the product.
The battery must be disposed off safely.
17.
Always use the collection bins provided
(check with your dealer) to protect the
environment.

SAFETY PRECAUTIONS

Thank you for purchasing LED-405FHDSMART: 40" Smart TV.
This is your assurance of quality, performance and value. Our engineers have included many useful and
convenient features in this product. Please be sure to read this instruction Manual completely to make
sure you are getting the maximum benefit from each feature.
This product was manufactured using the highest quality components and standards of workmanship.
It was tested by inspectors and found to be in perfect working order before it left our factory. For future
reference, record the serial number in the space provided.
Model No.: LED-405FHDSMART Serial number:
TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
LIGHTNING FLASH WITH ARROWHEAD
SYMBOL
The lighting flash with arrowhead symbol
within an equilateral triangle, it is intended
to alert the user of the presence of
uninsulated dangerous voltage within
the products' enclosure that may be of
sufficient magnitude to constitute a risk
of electric shock to persons.
The following label has been affixed to the unit, listing the proper procedure for working
with the laser beam:
Notes:
•
The images appearing in this manual are for reference only.
• Due to continual revision and improvement on our products design and specifications are subject
to change without further notice.
___________________
EXCLAMATION POINT
The exclamation point within an equilateral
triangle, it is used to indicate that a
specific component should be replaced
only by the component specified in the
literature for safety reasons.
CLASS 2 LASER PRODUCT LABEL
If the apparatus have the symbol in its
rating label and the power cord has two pins,
it means that the equipment is a Class II or
double insulated electrical appliance. lt has
been designed in such a way that it does not
require a safety connection to electrical earth.
3