Password Setup - Berger & Schroter BG310 Serie Mode D'emploi

2.7 Password Setup

For encryption settings, enter your four-digit pre-set password to
enter the camera. This function helps protect your privacy.
This function is off by default. To use this function:
2.7.1 Press L / M, to adjust the number from 0~9, and / to
change the password.
2.7.2 The same password must be entered twice to take effect.
2.7.3 After the password is set up, you will be required to enter the
same password on the next boot to enter the camera.
If you forgot your password, please contact us for assistance.
32