Section 4 − Installation; Important Information Regarding Ce Products (Sold Within The Eu); Specifications; Description - Miller RAD-100 Manuel D'instructions

4-1. Important Information Regarding CE Products (Sold Within The EU)

A. Information On Electromagnetic Fields (EMF)
!
This equipment shall not be used by the general public as the EMF limits for the general public might be exceeded during welding.
This equipment is built in accordance with EN 60974−1 and is intended to be used only in an occupational environment (where the general public
access is prohibited or regulated in such a way as to be similar to occupational use) by an expert or an instructed person.
Wire feeders and ancillary equipment (such as torches, liquid cooling systems and arc striking and stabilizing devices) as part of the welding
circuit may not be a major contributor to the EMF. See the Owner's Manuals for all components of the welding circuit for additional EMF exposure
information.
S
The EMF assessment on this equipment was conducted at 0.5 meter.
S
At a distance of 1 meter the EMF exposure values were less than 20% of the permissible values.
B. Information On Electromagnetic Compatibility (EMC)
!
This Class A equipment is not intended for use in residential locations where the electrical power is provided by the public low−
voltage supply system. There may be potential difficulties in ensuring electromagnetic compatibility in those locations, due to
conducted as well as radiated disturbances.

4-2. Specifications

Model Volts
RAD−100 115 VDC
* This equipment is designed for indoor use and is not intended to be used or stored outside.

4-3. Description

OM-238 428 Page 12
SECTION 4 − INSTALLATION
Motor
Horsepower
Speed
1/5 HP 2500 RPM
1
Ratio IP Rating
120 : 1 21S*
1 Motor
This unit is a heavy-duty motor de-
signed for automated strip clad ap-
plications.
The various strip head manufac-
turers have made their own adapt-
ers for their respective heads.
This unit is offered as a motor
only. Contact strip head manufac-
turers for mounting instructions.
ce-emf 1 2010-10
ce-emc 3 2010-10
Rated
Rated
Output
Torque
Speed
290 in. lb 21 RPM
Ref. 805 215-A