Product Specification - Philips 9290024887 Manuel D'utilisation

Table des Matières

Les langues disponibles

Operation guide

1. Power on: you will hear a beep, and the timer indicator will display "--".

2. Press the button to open the top lid, load the objects evenly into the UV-C appliance and close the top lid. Keep the top lid closed through-

out the appliance's operation.

3. Press working mode button to choose the appropriate working mode. See "Working mode guide" below.

4. Once the routine is completed, open the top lid, take objects out and unplug the UV-C appliance.

Working mode guide

Disinfect

Disinfect function inactivates viruses and bacteria

Gently press the "Disinfect" button, the timer indicator will display

"10" (10 min. disinfection duration by default). Both the timer

indicator and the working mode button will flash 3 times, during

this period, press the "Disinfect" button again to choose either "15"

or "20" as 15min. or 20min. working duration. The flash will stop in 2

seconds, and the UV-C appliance will start to work.

Dry

Dry function removes moisture from objects

Gently press the "Dry" button, the timer indicator will display "30"

(30 min. dry duration by default). Both the timer indicator and the

working mode button will flash 3 times during this period, press the

"Dry" button again to choose either "30" or "50" as 30min. or 50min.

working duration. The flash will stop in 2 seconds, and the UV-C

appliance will start to work.

IMPORTANT: DO NOT USE THE DRY FUNCTION FOR ANY ELECTRONIC

PRODUCTS. DOING SO CAN RESULT IN DAMAGE.

After dry routine, mind your hands when you open the box due to

the high temperature. Allow the box to cool for several minutes prior

to removing the object(s) placed inside.

Product description

Product model

Volt

Frequency

Wattage

UV-C appliance lifetime

Product Size

Product Weight

UV-C wavelength

Storage

Storage function continuously disinfects objects

Gently press the "Storage" button, the timer indicator will display

"20" (20 min. disinfection duration by default).

In this mode, the UV-C appliance will disinfect every 2 hours for 2

minutes after the 20 min. disinfection. The timer indicator is running

during the 2 hours periods and not during the 2 min. disinfection

duration and will stop at "--" when the 72 hours maintenance

routine is finished.

Disinfect+Dry

Disinfect+Dry function removes moisture and then disinfects objects

Gently press the "Disinfect+Dry" button, the timer indicator will dis-

play "40" (30 min. dry and 10 min. disinfection duration by default).

Both the timer indicator and the working mode button will flash 3

times, during this period, press the "Disinfect+Dry" button to choose

either "40" or "60" as 40min. or 60min. working duration(50min. dry

and 10min.disinfection). The flash will stop in 2 seconds, and the

appliance will start to work.

IMPORTANT: DO NOT USE THE DRY FUNCTION FOR ANY ELECTRON-

IC PRODUCTS. DOING SO CAN RESULT IN DAMAGE.

After disinfect+dry routine, mind your hands when you open the

box due to the high temperature. Allow the box to cool for several

minutes prior to removing the object(s) placed inside.