Chacon 34043 Mode D'emploi page 34

0. Introduction
Thank you for using this product.
• Please read all instructions carefully before using the product.
• Do not attempt to disassemble or repair the product yourself, as this will
invalidate the warranty.
• This product is compatible with these references: 34035, 34036, 34038,
34044, 34045, 34046, 34048)
1.1. Battery installation: Central alarm unit with opening
detector
2. Using a crosshead screwdriver, remove the screw from the back of the
opening detector.
3. Slide the cover down to access the battery compartment.
4. Insert the batteries, ensuring correct polarity (+/-).
5. Close the compartment with the cover and screw.
Note: When the battery is low, the LED indicator will flash slowly (3s/flash)
2. Installing the alarm unit
Once the batteries have been installed,
choose the location where you wish to
place your opening detector.
EN