Change The Display Information; Troubleshooting - JVC KD-X310BT Manuel D'instructions

Change the display information

Press DISP repeatedly.
1
FM or AM Station name (PS)* Frequency
Day/Clock (back to the beginning)
*
1
For FM Radio Data System stations only.
* 2
If unavailable, "NO PTY" / "NO TEXT" appears.
USB Playing time Day/Clock
name (back to the beginning)
* 3
If not recorded, "NO NAME" appears.
USB-IPOD Playing time Day/Clock
the beginning)
* 4
If not recorded, "NO NAME" appears.
AUX AUX Day/Clock
BT AUDIO Playing time Day/Clock
the beginning)
*
5
If not recorded, "NO NAME" appears.
MORE INFORMATION
1 2
Program type (PTY)* * Title*
3 3
Album title/Artist* Track title* Folder/file
4 4
Album title/Artist* Track title* (back to
5 5
Album title/Artist* Track title* (back to

TROUBLESHOOTING

Symptom
Sound cannot be heard.
1 2
*
"MISWIRING CHK WIRING THEN
RESET UNIT" / "WARNING CHK
WIRING THEN RESET UNIT"
appears and no operations can
be done.
Source cannot be selected.
Radio reception is poor. / Static
noise while listening to the radio.
Correct characters are not
displayed.
Playback order is not as intended.
Elapsed playing time is not
correct.
"NOT SUPPORT" appears and
track skips.
"CANNOT PLAY" flashes and/
or connected device cannot be
detected.
"READING" keeps flashing.
The iPod/iPhone does not turn on
or does not work.
Remedy
• Adjust the volume to the optimum level.
• Check the cords and connections.
Check to be sure the terminals of the speaker wires are
insulated properly, then reset the unit. If this does not
solve the problem, consult your nearest service center.
Check the [SRC SELECT] setting. ( 4)
• Connect the antenna firmly.
• Pull the antenna out all the way.
This unit can only display uppercase letters, numbers,
and a limited number of symbols. The unit can also
display uppercase Cyrillic letters. ( 16)
The playback order is determined by the file name
(USB).
This depends on the recording process earlier.
Check whether the track is a playable format. ( 16)
• Check whether the connected device is compatible
with this unit and ensure the files are in supported
formats. ( 16)
• Reattach the device.
• Do not use too many hierarchical levels and folders.
• Reattach the USB device.
• Check the connection between this unit and iPod/
iPhone.
• Detach and reset the iPod/iPhone using hard reset.
ENGLISH | 17