Auto Power Off - Roadstar PCD-498NMP Manuel D'instructions

DO NOT charge continuously for 24 hours or more, otherwise it will deteriorate the

performance of the rechargeable batteries.
 DO NOT try to recharge normal (not rechargeable) batteries. They can explode!
Notes:
If the rechargeable batteries are being charged for the first time, it will take approxi-

mately 15 hours to be fully charged.
If the operating time decreases drastically even when the rechargeable batteries are

properly recharged, purchase a new set of rechargeable batteries.
AUTO POWER-OFF
When the unit is stopped for approximately 30 seconds, the Auto Power Off function will acti-
vated and turn the unit off automatically.
CD-MP3 OPERATION
1. Connect your earphones into the [HEADPHONES SOCKET] (11);
2. Press [OPEN] (8) to open the [CD DOOR] (9) and place a CD with the label up in the
CD compartment;
3. Close the [CD DOOR] (9);
4. Press [PLAY] (2). Focus search is performed and playback will start automatically
from the first track;
5. Adjust the volume with the [VOLUME KNOB] (10) to the desired level;
6. To turn the unit off, press the [STOP] button (3) twice.
Note:
Press [PLAY-PAUSE] (2)to play. When it plays, press to stop playback temporarily

and press again to resume playback.
 Press [STOP¨] (3) when you want to finish playback. Press twice to switch OFF the
unit.
Press [SKIP -] (4) to go to the previous track, press & hold to go back fast.

Press [SKIP +] (5) to go to the next track, press & hold to go fast forward.

PROGRAMMING
Up to 99 tacks (MP3, 20 in CD) can be programmed and play in any order.
1. Stop the playback by pressing [STOP] (3);
2. Press [PROGRAM] (6), the display (1) will show the number of the track on the
left side and the number of program on the right side.
3. Select desired track by using [SKIP -/+] buttons (4/5);
4. Press [PROGRAM] (6) to confirm desired track into the program memory;
5. Repeat step 3 and 4 to enter additional tracks into the program memory.
6. When all the desired tracks have been programmed, press [PLAY] (2) to play the disc
in the order you have programmed.
Note: Press [STOP] (3) to terminate programmed play.
REPEAT - RANDOM MODE
During playback, press repeatedly the [MODE] (7) to select:
REP-ONE: The current track is played repeatedly.

 REP-ALL: All tracks are played repeatedly.
REP-FOLDER: The current folder is played repeatedly.

 RANDOM: Tracks are played randomly.
English 2