Operation Instructions; Controls - IO Mabe IOB150BB Manuel D'utilisation

Do not under any circumstances cut or remove the third ground prong from the power cord Do not under any circumstances cut or remove the third ground prong from the power cord
supplied. supplied.
Do not use an extension cord or adapter plug. However, if you must use an extension cord, it is Do not use an extension cord or adapter plug. However, if you must use an extension cord, it is
absolutely necessary that it be a UL-listed, 3-wire grounding type Beverage cooler extension absolutely necessary that it be a UL-listed, 3-wire grounding type Beverage cooler extension
cord having a grounding type plug and outlet and that the electrical rating of the cord is 10 cord having a grounding type plug and outlet and that the electrical rating of the cord is 10
amperes (minimum) and 120 volts. amperes (minimum) and 120 volts.
Do not use a cord that shows cracks or abrasion damage along its length or at either end. Do not use a cord that shows cracks or abrasion damage along its length or at either end.
If the Beverage cooler is going to be used in an area that is prone to power surges/outages, it is If the Beverage cooler is going to be used in an area that is prone to power surges/outages, it is
suggested that you use a power surge protector. The surge protector that you select must have suggested that you use a power surge protector. The surge protector that you select must have
a surge block high enough to protect the Beverage cooler it is connected to. Damages due to a surge block high enough to protect the Beverage cooler it is connected to. Damages due to
power surges are not considered a manufacturer covered defect and will void your product power surges are not considered a manufacturer covered defect and will void your product
warranty. warranty.
. .

OPERATION INSTRUCTIONS

CONTROLS

After plugging the Beverage cooler into a wall outlet, the cooler would turn on automatically and the LCD
screen would show the temperature inside of the cooler.
After setting your desired serving temperature, allow the cooler to cool down for 3 to 4 hours before
placing wine bottles in the Beverage cooler.
once to turn the interior light ON or OFF.
Press
Press to increase or press
2°C and 18°C or between 36°F and 65°F.
Press to begin adjusting the temperature for upper or lower zone
Press once to turn ON the cooler. Press and hold
Toggles the temperature display between
6.
to decrease the temperature in 1 degree increments between
about 3 seconds to turn OFF the cooler..
Celsius and Fahrenheit.
ºF/ºC