Description (Fig. A); Technical Data; General Safety Regulations - Valex BS 600 Instructions D'emploi

g
T hank you for choosing our product hereinafter also called
"machine".
IMPORTANT! Before using this machine, carefully read and
observe the safety standards and operational instructions
provided hereafter. Make sure that you know how to stop
the machine in case of emergency before starting the job.
Improper use of the machine could cause serious injury.
Carefully keep this instruction handbook in a safe place and
have it available for further reference if needed.
IMPORTANT! The saw bench is designed to cut wooden
boards. Any other use not indicated in these instructions
can cause damage to the machine and constitute a serious
risk to the user.
IMPORTANT! FOR D.I.Y. USE ONLY

DESCRIPTION (FIG. A)

1 Work surface
2 Parallel guide
3 Blade protection
4 Millimetre ruler
5 Divider knife
6 Blade guide insert
7 Extraction fan connection
8 Blade
9 Power supply cable
10 Switch
11 Piece pusher
12 Set square for 45° cuts
DESCRIPTION OF MARKS AND SYMBOLS
1

Technical data.

2 Important! Follow safety regulations.
3 Read the instruction manual carefully.
4 Always wear personal protective equipment: safety
goggles, ear plugs, and dust masks.
5 Always wear safety work gloves.
6 Do not touch electrically-powered parts.
7 Electric and electronic waste may contain potentially
hazardous substances for the environment and human
health. It should therefore not be disposed of with dome-
stic waste, but by means of differentiated collection at
specific centres or returned to the vendor in the event of
purchasing a new identical machine. The illegal disposal
of such equipment may result in prosecution to the full
extent of the law.
EQUIPMENT
The packaging includes the following items:
- Saw bench.
- Cutting blade.
- Piece pusher.
- Operator's use and maintenance manual (this manual).
(FIG. B)
TECHNICAL DATA
Voltage and nominal frequency
Power
R.p.m n
0
Cutting blade diameter
Blade hole diameter
Blade thickness
Teeth thickness
Max. cutting height
Work surface dimensions
Extraction fan connection diameter
Weight
Acoustic pressure LpA
Acoustic power level LwA
Applicable standard for noise testing: ISO 3744.

GENERAL SAFETY REGULATIONS

1) It is prohibited for children and unskilled personnel to use
the machine.
2) Always check the efficiency and integrity of the machine; it
can cause serious injury to the person using it.
3) Before connecting the machine to the electricity network,
make sure that none of the protective shields or components
are damaged or excessively worn. Check that the switch is
in the resting position.
4) Position the machine on a solid, level surface in order to
guarantee the safety of the work. Secure the machine to
the work surface using screws (not included).
5) Make sure that the service keys have been removed before
using the machine.
6) Do not attempt to repair this machine. In the event of
breakage or excessive wear to parts of the same, have it
checked by qualified personnel at authorised assistance
centres and only use original spare parts.
7) Do not use the machine in closed or poorly ventilated areas
or in the presence of flammable and/or explosive liquids,
powders, gasses or anything else of this kind.
8) Never remove any machine components and do not modify
it in any way.
9) Keep a safe distance from property, people and animals and
do not allow them to approach while you are working.
10) The operator is responsible for third parties in the machine
work zone.
11) Only work during daylight hours or with sufficient artificial
lighting.
12) During work, always wear suitable safety goggles, mask,
earplugs and gloves. Normal glasses are not a substitute
for protective goggles.
13) Tie long hair back and do not wear bracelets or long
necklaces as they could get caught up in the moving parts
of the machine.
14) Never hold the machine by the cutting tool.
15) Always keep the work area free from obstacles.
16) To stop the machine, only use the switch.
17) Disconnect the machine from the power supply: when
out of use, when left unattended, when the power cable
is damaged, when changing the cutting tool, when being
transported from one place to another, when cleaning or
carrying out maintenance on it.
18) When not in use, keep the machine in a dry place out of
reach of children.
7
230V~50Hz
530W
2950/min
-1
200 mm
16 mm
1.5 mm
2.5 mm
40 mm
500 x 335 mm
38 mm
10.2 kg
86,75dB(A)
99,75dB(A)