Connecting To An Antenna; Plug & Play (Initial Setup) - Samsung 7 Serie Manuel D'utilisation

When the TV is initially powered on, basic settings proceed automatically.
✎
Preset: Connecting the mains and antenna.
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWERP button. Plug & Play is available only when the Input source is set to TV.
✎
To return to the previous step, press the Red button.
1
Selecting a language
2
Selecting Store Demo or
Home Use
3
Selecting a country
4
Selecting an antenna
5
Selecting a channel
6
Setting the Clock Mode
7
Time Zone
8
Viewing the
HD Connection Guide.
9
Enjoy your TV.
If You Want to Reset This Feature...
Select Setup - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is "0-0-0-0." If you want to
change the PIN number, use the Change PIN function.

Connecting to an Antenna

ANT 2 IN
ANT 1 IN
(SATELLITE)
Plug & Play (Initial Setup)
Press the ▲ or ▼ button, then press the ENTERE button.
Select the desired OSD (On Screen Display) language.
Press the ◄ or ► button, then press the ENTERE button.
• Select the Home Use mode. Store Demo mode is for retail environments.
• To return the unit's settings from Store Demo to Home Use (standard): Press the volume
button on the TV. When the OSD volume is displayed, press and hold
Press the ▲ or ▼ button, then press the ENTERE button.
Select the appropriate country.
✎
After selecting the country in the Country menu, some models may proceed with an additional option to setup
the pin number.
✎
When you input the PIN number, 0-0-0-0 is not available.
Press the ▲ or ▼ button, then press the ENTERE button.
Select Air, Cable or Satellite.
Press the ▲ or ▼ button, then press the ENTERE button.
Select the channel source to memorise. When setting the antenna source to Cable, a step appears allowing you to
assign numerical values (channel frequencies) to the channels. For more information, refer to Channel →
Auto Store (p. 14).
✎
When Air or Cable is selected first: After all Air or Cable channels are stored, the step for storing Satellite
channels is displayed.
✎
When Satellite is selected first: After all Satellite channels are stored, the step for storing Air or Cable
channels is displayed.
✎
Press the ENTERE button at any time to interrupt the memorisation process.
Set the Clock Mode automatically or manually.
Press the ▲ or ▼ button to select Auto, then press the ENTERE button.
Press the ▲ or ▼ button to select the your time zone, then press the ENTERE button. (depending on the
country)
The connection method for the best HD screen quality is displayed.
Press the ENTERE button.
Satellite Antenna
VHF/UHF Antenna
Cable
or
ANT OUT
MENU for 5 sec.
English
POWER
P
7