Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EXTENSIONS & ADAPTERS
When using an extension or adapter
(increasing the effective length of the torque wrench)
the output torque value will change.
To calculate the new torque output of the wrench
use the following formula:
A = Torque exerted at the end of adapter
L = Distance between square drive and hand position
B = Wrench scale reading
C = Length of adapter or extension
A number of variables including the length of the
adapter or extension, length of the wrench and
variations in hand position on the wrench will
affect the accuracy of the above calculation.
STANDARD
We calibrate each torque wrench at the factory using
torque standards according to DIN ISO 6789 & ASME
B107.300-2010, and certify it meets 4%+/- accuracy
and the requirements of specifications DIN ISO 6789
and ASME B107.300-2010.
CONVERT FROM
TO
ozf-in
ibf-in
lbf-in
ozf-in
lbf-in
kgf-cm
lbf-in
lbf-ft
lbf-in
kgf-m
lbf-in
N-m
lbf-in
dN-m
lbf-ft
N-m
lbf-ft
kgf-m
lbf-ft
lbf-in
N-m
dN-m
N-m
kgf-cm
N-m
kgf-m
N-m
lbf-in
N-m
lbf-ft
dN-m
lbf-in
dN-m
N-m
kgf-cm
ibf-in
kgf-cm
N-m
kgf-cm
lbf-ft
kgf-cm
N-m
1/2" DRIVE SPLIT BEAM FLEX
HEAD TORQUE WRENCH
MULTIPLY BY
0.0625
16
1.1519
0.083333
0.011519
0.1130
1.130
1.356
0.1382
12
10
10.20
0.10197
8.8507
0.73756
0.885
0.100
0.8681
0.09807
7.233
9.807
OPERATION
Unlocked
Locked
STOP
Page 2
TSBC250F
Adjust the torque
Index Line
CLICK
At lower torque levels,
the click/impulse will be more faint.
2004065-14
Publicité
Table des Matières
