Default Values; Installation Instructions - USRobotics Wireless Ndx ADSL2+ Guide D'installation Rapide

Default Values

N
The Wireless dx ADSL2+ Gateway has the following default values:
! IP Address:
192.168.1.1
System Requirements
! ADSL line installed by your Internet Service Provider
! A computer with an Ethernet adapter installed
! An HTML 4.01-compliant Web browser with JavaScript enabled

Installation Instructions

Step One: Connect Microfilter(s) (if included or required by your ISP)
A microfilter removes interference between voice and ADSL signals. If a micro-
filter was not included with the gateway, ask your ISP if microfilters are necessary
for your telephony devices.
1. Plug each telephony device cable (telephone, fax machine, etc.) into a micro-
filter.
2. Connect the microfilter into the telephone wall jack.
N o t e : Do not install a microfilter on the cable that will connect your gateway
to the telephone jack unless you have a dual connection microfilter
with a connection for both the gateway and the telephone.
English
3