Télécharger Imprimer la page

Pelsis EXOCUTOR EX16 Mode D'emploi page 2

Publicité

Les langues disponibles

Les langues disponibles

CATCH TRAY REMOVAL
The catch tray is connected to the power supply of the unit via a hidden switch. By
removing the catch tray, the connection is broken and power is cut to the unit. This
ensures safe access to the unit for servicing and cleaning.
NB - WHEN REPLACING THE CATCH TRAY BACK INTO EXOCUTOR
FULLY INTO POSITION AND THAT POWER IS RESTORED TO THE UNIT.
TUBE REPLACEMENT
TUBE REPLACEMENT SHOULD BE CARRIED OUT BY SERVICE PERSONNEL ONLY, AFTER
ENSURING THAT THE UNIT IS DISCONNECTED FROM THE MAINS SUPPLY.
To ensure the efficiency of Exocutor
be replaced annually. After twelve months the phosphor coating that emits the
correct wavelength of UV light has burnt away and the UV output is diminished
substantially.
To replace the UV tubes...
1. Remove the catch tray, breaking the power supply to the unit.
2. Rotate the tube through 90°, freeing it from the tube holders.
3. Pull the tube away from the chassis.
4. Dispose of the used UV tubes in conjunction with local WEEE regulations.
STARTER REPLACEMENT
STARTER REPLACEMENT SHOULD BE CARRIED OUT BY SERVICE PERSONNEL ONLY,
AFTER ENSURING THAT THE UNIT IS DISCONNECTED FROM THE MAINS SUPPLY.
The starters provide an extra spark to initially light the UV tubes. Starters wear out
and should be replaced at the same intervals as the UV tubes.
To replace the starters...
1. Rotate the starter anti-clockwise.
2. Pull the starter free from the unit.
SPECIFICATION / REPLACEMENT PARTS
Unit
EX16
Voltage
220V ~ 60Hz
Dimensions(mm) 390 x 140 x 265
Coverage
50 Sq. Meters
Weight
3.3 Kg
Light Output
16W
Tubes
2 x TPX8-12
Starter
2 x I154
Tray (W / S/S)
T-EX16W / T-EX16S
Unit
EX40
Voltage
220V ~ 60Hz
Dimensions(mm) 694 x 140 x 265
Coverage
140 Sq. Meters
Weight
5.6 Kg
Light Output
40W
Tubes
2 x TPX18-24
Starter
2 x I154
Tray (W / S/S)
T-EX40W / T-EX40S
R6 08/18
Sterling House
Grimbald Crag Close
Knaresborough
North Yorkshire
HG5 8PJ
in catching flying insects, the UV tubes should
Unit
EX30
Voltage
220V ~ 60Hz
Dimensions(mm) 538 x 140 x 265
Coverage
100 Sq. Meters
Weight
4.5 Kg
Light Output
30W
Tubes
2 x TPX15-18
Starter
2 x I154
Tray (W / S/S)
T-EX30W / T-EX30S
Unit
EX80
Voltage
220V ~ 60Hz
Dimensions(mm) 694 x 140 x 265
Coverage
280 Sq. Meters
Weight
5.7 Kg
Light Output
80W
Tubes
2 x TPX36-24
Starter
2 x I154
Tray (W / S/S)
T-EX40W / T-EX40S
T +44 (0)800 988 5359
F +44 (0)1423 863 497
W www.pelsis.com
E info@pelsis.com
UK
, ENSURE IT IS PUSHED
WEEE Compliance No. WEE/GF0661QR
Information provided on these instructions is modified and
updated from time to time.
This is due to the constant
redevelopment of our products. As such, it is not intended that
you should rely on it or that it should form part of any contract.
Pelsis Ltd
2018
C

Publicité

loading

Ce manuel est également adapté pour:

Exocutor ex30Exocutor ex40Exocutor ex80