Ir Remote/Front Panel Control; On/Off; Volume/Mute; Source Select - ELAC EA Serie Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

IR Remote/Front Panel Control

IR REMOTE/FRONT PANEL CONTROLS
The EA101EQ-G can be controlled via the included IR Remote, front panel controls or
EA101EQ-G app. The front panel and remote would typically be used for amp control. The
app has unique features that can be used for fine tuning amp performance based upon
the specific sources, speakers and room conditions. This section covers front panel and IR
Remote control. See section: EA101EQ-G App for information on the use of the app for setup
and fine tuning.

ON/OFF

On the IR Remote, Press the
button to turn the amp ON. Press again to turn the amp OFF.
On the front panel, Press the Power button to turn the amp ON. Press again to turn the amp
OFF. When the amp is turned ON, the front panel display will show the ELAC logo followed by
the volume level, current source. If the source is outputting a Dolby Digital signal, the Dolby
Audio™ Logo will appear. When the amp is turned OFF the display will turn off.

VOLUME/MUTE

On the IR Remote, Press the
button to increase volume. Press the
button to
decrease volume. Press the
button to mute audio output. Press the
button again
to un-mute audio output. On the front panel, turn the Volume knob clockwise (right) to
increase volume. Turn the Volume knob counter-clockwise (left) to decrease volume. There is
no front panel mute control.
When adjusting volume, the volume level will appear in the front panel display.
NOTE: If a subwoofer is connected, the volume/mute controls will affect speaker and sub
volume/mute. If headphones are connected, output to the speakers/sub will be cut and the
volume/mute controls will affect headphone volume/mute.

SOURCE SELECT

On the IR Remote, press the Ana 1, Ana 2, Opt 1, Opt 2, Coax or USB buttons to select a
specific source. On the front panel, tap the Source button to change source selection one
at a time. Press and Hold to scroll through available sources to the desired selection.
NOTE: For a Bluetooth source, see section: Bluetooth for additional information.
12

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Ea101eq-g

Table des Matières