Drain Kit; Cleaning The Drain Sump - Lynx LM24BF Manuel D'entretien Et D'installation

USING YOUR BEER DISPENSER AND CARE AND CLEANING
Drain kit (All Models):
The drain kit is shipped in place and ready to use. To
empty: Pull drain hose out of bottle cap, remove bottle
from unit, unscrew cap and discard waste and rinse bottle.
Reinstall bottle in unit.

Cleaning the drain sump:

On a free standing beer dispenser remove the grate from
in front of the tower, clean with soap and water and dry
before reinstalling. Clean the sump area with soapy water
and dry. (See Figure 35).
On a built in beer dispenser remove the grate and coun-
ter top sump, clean with soap and water and dry before
reinstalling. Clean the sump area with soapy water and dry.
(See Figure 36).
16
CARE AND USE/INSTALLATION
Push faucet handle back toward
tower to close the faucet
Unscrew
cap
Figure 35
Figure 36
Removable
grate for clean-
ing sump area
Grate
Counter top
sump
Clean and dry
sump area