morse Metal Devil NXT CSM9NXTB Guide D'utilisation Et De Securite page 4

IMPORTANT SAFETY INFORMATION
While operating the saw:
• Always use the safety glasses and hearing protection
provided, or their equivalent, when using this saw.
A ying chip could cause blindness. Cutting noise
could seriously impair hearing.
• Never use the tool without the original protection
guard system. Ensure that moveable guards operate
freely without restrictions.
• Do not try to defeat any safety device. Do not lock
the moving guard in the open position.
• Ensure that the cutting depth adjustment
handle/angle adjustment handle and parallel blade
guide are firmly fixed while using the tool.
• Support the work piece properly. Never hold the
work piece in your hand or put it across your legs.
Always use both hands to operate the saw.
•
Keep hands out of path of blade.
• Never reach around, under or behind the saw blade
when operating the machine. The guard cannot
protect your hand if you do so.
Do not touch the blade while it is in motion. Do
•
not try to stop the blade by lateral pressure on
the blade.
• Never reach for a saw blade until the blade has
completely stopped rotation and the machine has
been disconnected from the power source.
• When cutting wood, use suitable dust extraction and
breathing apparatus.
• Remove the plug from main power supply before
replacing the blade, making adjustments or
performing other maintenance work.
• Always keep the power cord away from the moving
parts of the tool.
• In case of saw jamming, immediately switch off the
saw and disconnect the plug. Remove the saw from
the material and inspect the blade for damage.
• Use only the flanges and washers that are supplied
with the tool. Replace them with original (OEM)
replacement parts if they become damaged or
scored.
• When storing the tool, switch off the motor, unplug
the cord from the power source and ensure that all
moving parts have come to a complete stop.
3
READ AND SAVE ALL INSTRUCTIONS FOR FUTURE USE!