Publicité
Les langues disponibles
Les langues disponibles
Operation
1. Check oil level before each use.
2. Follow operating instructions for engine or motor.
DO NOT EXCEED THE PRESSURE RATINGS OF THE SYSTEM COMPONENTS A HYDRAULIC
PRESSURE GAUGE IS RECOMMENDED IN THE HYDRAULIC CIRCUIT.
3.The unloading valve is adjustable up to 900 PSI by turning the adjusting screw clockwise.
CAUTION
Pressure gauge required when adjusting unloading valve.
NOTE:Increasing the unloading valve pressure will require increasing the pump drive horsepower.
Factory preset, with a 400-900 PSI adjustment range.
CAUTION
If pump has not operated for an extended period of time, manually rotate pump shaft to
prime and lubricate pump.
Maintenance
1. Keep the reservoir filled with hydraulic fluid.
NOTE: Use a good quality hydraulic oil.
2. Make frequent inspection of hydraulic fluid and change if contaminated.
3. To fill the reservoir with clean oil: Use a clean funnel fitted with a fine mesh wire screen. Do not
use a cloth strainer. Most pump failure, valve malfunctions and short unit life can be traced
directly to other foreign material (water, chips, lint, etc.) getting into, or already in, the hydraulic
system.
4. Keep the unit clean of dirt and foreign materials.
5. Keep electrical connections clean.
Size:145x210mm
157克双铜
HI-LOW HYDRAULIC GEAR PUMPS
INSTRUCTION MANUAL
WARNING
5 OF 5
REV 06/29/17
2.09.05.30.424
Publicité
