Pelgrim GVW360XL Notice D'utilisation page 79

Table continued from last page
Problem
Grease deposits in the dish-
washer.
The dishes are not dry enough.
36
Possible causes
Low temperature programs
have been selected for a pro-
longed period.
Low temperature programs
have been selected for a pro-
longed period.
The Auto Open option is not
activated.
The dishwasher is not fully
loaded.
Rinse aid needs topping up or
dosage is set too low.
The setting TAB is activated and
all-in-one detergent with insuffi-
cient drying effect is being used.
Action
Run a program with a high tem-
perature once or twice a month.
Or run a self-cleaning program.
See Self-cleaning in the chapter
Using the dishwasher.
Select a program with Intensive
mode. The program will use a
higher temperature to dissolve
grease on very dirty dishes. Or
run a self-cleaning program
once or twice a month. See
Self-cleaning in the chapter Us-
ing the dishwasher.
Activate the Auto Open option.
Fully load the dishwasher.
Top up with rinse aid or in-
crease the rinse aid dosage
level. See the chapter Settings.
Switch all-in-one detergents or
deactivate the setting TAB and
top up with salt and separate
rinse aid. See Rinse aid in the
chapter Settings.