Klarfit Olav Mode D'emploi page 32

EN
3
Insert the end of A3 (leg top) into the socket of A5 (lower leg section) and
align the holes with each other.
Use parts B1 (bolts) for fastening, B5 (washers), B3 (nuts) and
B4 (plastic caps).
Slide A6 (cross brace) onto A5 (lower leg section) and secure the cross brace
with parts B2 (bolts), B6 (spring washers),
B5 (washers), B3 (nuts) and B4 (plastic caps).
Repeat the steps to attach A3 (leg top), A5 (leg bottom) and A6 (cross brace)
on the other side of A2 (long top tube).
32