CARAVITA BELVEDERE Instructions De Montage Et D'utilisation page 32

Installation
Installing the pole in the base
2 2
1
2
3 3
1
32 | 88
3 Tighten the fixing screws using the power drill.
1 Screw the screw M10x30 into the base (12-15 mm).
2 Set up the pole in a vertical position.
3 Push the eyelet on the stainless steel base into the screw.
4 1 person fastens the 2nd screw M10x30, while the 2nd person holds the
pole.
5 Screw the other screws into the remaining eyelets.
6 Tighten all 4 screws using the hex key.
4 4
The parasol become slightly more stable.
The parasol is sufficiently stable for further installation steps.
4000258 [v0]/2022-01-01