Electrical Connection - hortiONE 420 Manuel D'utilisation

hortiOne

Electrical Connection

(1) Connect the LED-Driver to IEC Cable,
(2) Connect the LED-Panel with the LED-Driver
(3) Connect the IEC Calbe to your power outlet.
Technical Specification – Dimensions
2 of 24
hortiONE GmbH
hortione.com
420 & 600
1. Insert the hanger into the first hole and move it down
until the other side of the hanger reaches the second
hole
2. Push down the other side of the hanger inside the hole
3. Pull up the first side of the hanger and ensure that both
wings are looking out below.
4. Repeat the process on the other side of the board.
2
hortiONE_LED
1
3
hortiONE
Horti One
manual, 2022
hortiONE