Valiryo BODY DRYER Manuel De L'utilisateur page 28

1
Instructions for use
Security warnings
Use this appliance only for its intended use as described in this manual.
1
Do not use attachments not recommended by the manufacturer.
Follow the assembly instructions here provided.
2
If the supply cord is damaged, it must be replaced by the manufacturer,
3
its service agent or similarly qualified persons in order to avoid hazard.
Before you connect the appliance, ensure that the voltage indicated on
4
the appliance corresponds to the local power voltage.
Connect the plug to a normalized power outlet.
Do not turn Valiryo® on while still wrapped.
5
6 6 Do not force the control pad.
The manufacturer does not take responsibility for an inappropriate
7
use of Valiryo® or its partial or total modification.
Australia - New Zealand
The installation must be done in accordance with the AS / NZS 3000
standard.
Serial numbers starting with K3, K4 and K5
The means for disconnection for Valiryo without plug, must be
incorporated into the fixed wiring according to the local wiring rules.
www.valiryo.com
Read this manual in order to guarantee
maximum security and a proper use of Valiryo®.
Valiryo®'s power
network values
220-240 V
~50-60 Hz
Normalized power outlet
24