LUTEC 12513LE-SL Manuel D'utilisation page 7

5
A
A3
B1
Install Solar LED Bulbs (B1), and pull off Ribbon (A3) and discard. Turn ON the switch in Solar Panel
Top (A).
Warning:
LED lights will not automatically turn on unless the battery has been charged and it is
dark outside. You can test the lights by placing the empty box upside down over the Post Light Head.
Once darker, the LED lights should turn on in several seconds.
7
B2
Attach Solar Panel Top (A) to Lamp Head (B) with the previously removed two Thumbscrews (A1).
Tighten with flathead screwdriver (not included). Carefully screw the lamp head onto Top Pole (C),
securing with the preassembled Set Screw (B2). Tighten with Allen Wrench (D).
7