Xtensions XM-173 Mode D'emploi page 14

Note: Please note that USB operation is not
D
supported by Windows 95/NT.
GB
5. Establishing the RF link
F
To avoid irritation with other RF units you can
choose between two frequencies (channels) by
E
using the switch on the bottom of the mouse (in
the interior of the accu compartment). Choose
I
frequency 1 or 2 by using a pointed device (e.g.
a pen).
1. Press the button on the top of the receiver
and then the button on the bottom of the
mouse by using a pointed device.
2. The LED indicator on the receiver lights when
you do this. When you move the mouse, the
LED blinks.
RF button
14