JAROLIFT TDRCT04 Mode D'emploi Original page 19

Individual service
Select the desired channel or motor using the K3 key (for key description, see page 5).
Briefly press the UP, STOP or DOWN key to control the motor.
Select the active
channel with the
K3 key.
Setting the group control
With the TDRCT-04 hand-held transmitter, it is possible to operate 4 units individually or together as a group by radio. To do
this, select the desired channel via the K3 key (description see page 5).
The active channel can then be controlled via the UP/STOP/DOWN operating keys.
For group operation, press the K3 key several times. As soon as the hand-held transmitter is beyond the fourth channel, all 4
channels are marked in the display.
This means that all 4 channels are now selected and can be operated simultaneously via UP/STOP/DOWN.
To switch back to single operation mode, press the K3 key again.
The frame around the channel display automatically changes back to the first channel.
Use the UP, DOWN
and STOP buttons
to control the
motor.
PROGRAMMING
19