GREENBLUE GB850 Mode D'emploi page 2

STEP 1
As illustrated, connect the
mop handle [2] and twist tight.
STEP 2
Locate the three tabs found on the mop head [3] and
insert them into the corresponding slots found on the
microfiber cloth [4]. Once inserted, stick the microfiber
cloth [4] onto the mop head [3] pressing equally
and firmly.
STEP 3
Fill the wash tub [5] with water and please do not
over-fill (up to the "Water Level").
STEP 4
Fold the mop as illustrated.
STEP 5
Place the mop into the
slot of wash tub [5] and
hold the hand grip [1] to
rinse mop by vertically
moving the handle up
and down several times
until all the dirty and
grime have benn
scoured off the mop
head.
STEP 6
Move the mop to the slot of dry tub [6]. Slowly push down
the mop and then lift up to squeeze water out of the mop.
Repeat the up & down movement to dry the mop
for desired dampness. Then start mopping the floor.
Tips: Please vertically lift the handle to avoid tipping
over the bucket.
STEP 7
Dump the water directly.
-2-