Activating/Deactivating The Handset - Bico Swing-flex Mobiletto M2 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Activating/deactivating the handset

• Press the function key on the drive briefly 2x. The LED
on the function key switches on and the drive enters
programming mode for around 10 s.
• Press keys 1 and 2 on the handset simultaneously and keep them
pressed until the LED goes out and the function LED is lit steadily (activa-
tion time approx. 10 s).
The programming process on the handset is now complete. The first move-
ment can now be executed by pressing a key. If the programming process
for the radio transmitter fails or it is necessary to decommission the trans-
mitter, you can interrupt communication between the transmitter and the
drive as follows:
• Press the function key on the drive 4x in quick succession. The underbed
lighting is switched on.
• Now press the function key 1x. The underbed lighting goes out and the
transmitter is deactivated.
Storing a memory function
Move the bed to the desired position using keys 1 – 8.
• Press programming key 5/7* 3x in quick succession – the function LED is
lit steadily.
• Press a position key (keys 9 – 12) within approx. 3 s and wait until the
function LED stops flashing.
• The desired position is now stored on the position key selected.
• A stored memory position can be overwritten at any time by repeating
this process.
Emergency reset function
Using the emergency reset function, the bed
can be moved into basic/sleep position in the
event of a power failure or handset malfunc-
tion (e.g. flat batteries).
• The motor can be powered for a short time by means of two 9V block
batteries. In order to prevent the batteries from early discharge, the block
batteries are not connected in the factory.
• The drives can be moved to the basic position by pressing the function
key .
The batteries should only be connected to lower the bed when necessary.
The drive movement can only be executed once. After this, the batteries
must be replaced in order to ensure that another emergency reset opera-
tion can be carried out.
Function-LED
1
M1
M3
Housing upper part
Pantone 877 C
Housing lower part
Pantone Black C/soft touch
Housing decor/middle part
Pantone Black C/glossy
Switchmat
Transparency
Pantone Black C
Description
Revision
Date
Name
Index
A4
X
Format
Date
Name
This document is confidential. Your disclosure as
well as recovery and communication of its contents
Scale
22.11.19
Herrmann
Drawed
is only allowed with our explicit permission.
1:1
We reserve all rights, especially to file intellectual
property rights.
Checked
Battery clip
Battery
2
M2
M4
Article-No.:
Dewer

Publicité

Table des Matières
loading

Produits Connexes pour Bico Swing-flex Mobiletto M2

Ce manuel est également adapté pour:

Swing-flex mobiletto m3

Table des Matières