Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
temperature from 40°C to 100°C . You may increase or decrease the
desired temperature in steps of 5°C at a time
For KEEP WARM: Use the arrow button
to select the desired
temperature from 40°C and 90°C. You may increase or decrease the
desired temperature in steps of 5°C at a time.
There is no default setting for the temperature to be maintained. The
temperature maintenance will be automatically deactivated when the
kettle jug is separated from the base.
This feature guarantees the right temperature even if you do not use
the water directly after boiling.
For EXTENDED BOIL: Use the arrow button
to select the desired
duration of the extended boil time from 3 to 6 seconds. Note : The
extended boil function will be effective only if the desired temperature
is set to 95°C or higher .
After selecting the desired setting, press the power button
. Once
the kettle has reached its desired temperature, the heat water icon
will stop flashing.
If the temperature is set and you wish to change it , you will have to
turn off the kettle and switch it back on. As soon as the kettle reaches
the desired temperature, it will shut off automatically (unless the keep
warm function has been activated). The heat water icon
will
stop flashing and the current water temperature will be displayed on
9
Publicité
Table des Matières
