Samsung NX36R9966P Serie Manuel D'utilisation page 42

Maintenance
NOTE
• Do not use a dishwasher to clean the racks.
If a rack does not slide in and out smoothly, apply a few drops of cooking oil
•
to the oven rack guides.
• If a rack becomes too difficult to slide in or out, lubricate the rack.
• To purchase the graphite lubricant, contact us at 1-800-SAMSUNG (726-7864).
• For online shopping, visit http://www.samsungparts.com/Default.aspx and
search for part DG94-02786A.
CAUTION
• Do not leave racks in the oven during the self-cleaning cycle. The extreme
heat generated in this cycle can permanently peel off the racks' coating and
make it difficult to remove the racks.
• Do not spray cooking oil or lubricant directly onto the gliding rack.
42 English
NX9900R_CHEF_NX36R9966PS_AA_DG68-01105A-00_EN+MES+CFR.indb 42
Door
Do not remove the inner gasket of the oven door for cleaning.
Inner side
• Inner surface: Clean the inner side of the door manually using a soapy plastic
scouring pad, and then wipe with a dry cloth. Take care not to get the gasket
wet or allow moisture into the door.
• Inner glass: The inner glass is cleaned automatically during the self-cleaning
cycle.
Outer side
• Outer surface: Follow the cleaning instructions for a stainless steel surface in
the previous section.
• Outer glass: Clean the outer glass using a glass cleanser or soapy water. Rinse
and dry thoroughly. Take care not to get the gasket wet or allow moisture into
the door.
Do not let moisture to enter the door or
contact the door gasket (*). Moisture may
reduce the gasket's performance.
CAUTION
2019-01-15 3:05:06