Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION STEPS
TESTING OPERATION
TESTING OPERATION
1. Turn power ON to the Drawer Microwave.
2. Set the clock according to the instructions in the Use and Care Manual.
3. Place a microwave-safe container with a cup of water in the unit and close the drawer.
4. Touch START/ADD MINUTE.
5. The microwave's fan should run and its light should come on.
6. When it shuts off, the water should be warm or hot.
Refer to the Use and Care Manual for full operating procedures.
CLEANING AND MAINTENANCE
CLEANING AND MAINTENANCE
Refer to the Use and Care Manual for cleaning instructions.
BEFORE YOU CALL FOR SERVICE
BEFORE YOU CALL FOR SERVICE
Read the BEFORE YOU CALL and operating instruction sections in your Use and Care Manual. It
may save you time and expense. The list includes common occurrences that are not the result of
defective workmanship or materials in this microwave product.
Refer to the warranty in your Use and Care Manual for Hestan's service number and address. Please
call or write if you have inquiries about your microwave product and/or need to order parts.
(CONT.)
Screws (4)
Figure 10. Screws and mounting flange
Parts supplied
Mounting
flange
4 Screws
©2020 Hestan Commercial Corporation
EN
11
Publicité
Chapitres
Table des Matières
