Assembly Instructions - hometrends GAD16601WM-C Manuel D'utilisation

6

Assembly Instructions

1
DO NOT RETURN TO PLACE OF PURCHASE.
For assistance, call 1.888.398.8643 toll-free . Please have
your Owner's Manual and model number available for
reference .
Note: The model number is printed on a label which can be found on
the inside door, back or side of the base assembly .
Assembly Tips:
1 . Select an area where you will assemble this product . To
protect components, choose a smooth surface that's free of
cracks or openings .
2 . Spread out all parts .
3 . Tighten all hardware connections by hand first . Then, before
completing each step, go back and fully tighten all hardware .
Be careful not to over-tighten . That could damage surfaces or
strip threads .
4 . For best results, complete each step in the order presented .
To complete assembly you will need:
• (1) Leak detection solution (instructions on how to make the
solution are included in the "Operating Instructions" section of
this manual) .
• (1) Precision-filled LP gas grill tank with Acme Type 1 external
threaded valve connection (standard grill size) (not included) .
Typical assembly is approximately one hour .
3
Attach Base
B
B
x 4
LP Gas Outdoor Fireplace
Model No. GAD16601WM-C
2
Attach Locks
A
x 6
C
x 2
4
Place Lava Rocks
W CAUTION: Do NOT dump lava rocks out of package. Carefully
place lava rocks by hand so dust does not clog burner.
W CAUTION: Use only Mr. Bar-B-Q Products LLC factory-
authorized lava rock. The use of any lava rock that is
not factory-authorized can be dangerous and will void
your warranty.
W CAUTION: Do NOT cover pilot housing.
Note: Lava rocks should be 2 - 3 .2 in . (5 - 8 cm) long . Approx . 8 lbs . (3 .6 kg) of lava
rocks are needed (included) .
D
x 6