Remote Control Instructions; Manual Operation - Seville Classics GloGlobe EHF10231 Manuel D'utilisation

Note: Before using the remote control for the first time, remove the
plastic sheet from the battery cover and discard.

To operate GloGlobe
On/Off/Mode button (PHOTO 3) for 3 seconds to turn on.
Press and hold for 3 seconds to turn off.

When GloGlobe
to the last setting used. When turned on by On/Off/Mode button, it
will default to FADE option. Push On/Off/Mode button to cycle
through the 4 modes (flash/strobe/fade/smooth).

Use stainless-steel hanger to hang GloGlobe

Remote Control Instructions

GloGlobe
Turn
Brighten/Increase Speed - Increases the brightness of
the light in single color mode or increases speed of color
change in multi-color mode
Dim/Reduce Speed - Reduces the brightness of the light
in single color mode or reduces speed of color change in
multi-color mode.
Single Color Mode
Choose from 16 solid colors, including white.
Multi-Color Modes
FLASH – Colors flash red, green, and blue.
STROBE – 7 colors flash.
FADE – Colors fade from one to the next through all 16
colors. This mode will have the shortest run time.
SMOOTH – Colors slowly transition through red, green,
and blue. This mode will have the longest run time.

Manual Operation

®
without remote control, press and hold the
®
is first turned on by remote control, it will default
®
On/Off
®
6
(PHOTO 3).