Operation; Area Measurement - SPARKY Professional MFD 16 Notice Originale

BUTTON FUNCTION
M/FT Converts between metric and
British units (inapplicable for
DE/MODE )
DI/MODE Selects the measuring mode:
length, accumulating length,
area or volume (DE/MODE
cannot be performed)
RM Recalls the last stored data in
memory (DE/MODE cannot be
performed)
READ Switches to measuring dis-
tance mode (DE/MODE cannot
be performed)
PUSH Pressing the ON/MODE button
actuates the probe
In DETECTOR mode DI/MODE, READ, RM
and M/FT buttons cannot be actuated
In DISTANCE mode DE/MODE and PUSH
buttons cannot be actuated
In C/F mode only DI/DE can be actuated, the
rest of buttons cannot be actuated
V – Operation
This measuring tool is radio suppressed in com-
pliance with EMC Directive 2004/108/EC.
This tool is designed for measuring distances,
accumulating lengths, widths, heights, calculat-
ing areas and volumes, detecting "live" wires,
metal, soft and hard wood in walls, ceilings and
floors. The measuring tool is suitable for interior
and exterior construction site measuring, finish-
ing and repair activities.
LENGTH MEASUREMENT
Press ON/OFF button to switch on the de-
vice and then press MODE button to select
DISTANCE mode measurement.
4
EN
Press READ
button
Measurement
begins
Have you pressed
READ button for
less than 2 s?
YES
The device performs
only 1 measurement
The distance value
appears on the display
ACCUMULATING RESULTS
In this mode upon restarting data collection, the
new data are added to the old ones.

AREA MEASUREMENT

Once the device has been switched on, press
MODE button to select measuring area/volume.
Press READ button to measure the length L,
press READ button again to measure the width
W. Then the second line of the screen will dis-
play the value of the area.
VOLUME MEASUREMENT
Once the device has been switched on, press
MODE button to select measuring area/volume.
Press READ button to measure the length L,
press READ button again to measure the width
W, press READ button for the third time to
measure the height H. Then the second line of
the screen will display the value of the volume.
MEMORY MODE
The result of the measurements is automatically
The device
performs 2
measurements
per second
The device
NO
measures distance
continuously
NO
Have you
released READ
button?
YES
MFD 16