Connecting The Probes - Grant OQ610 Guide De Démarrage

3. Connecting the Probes

The OQ610 is fitted with six thermocouple connector sockets which support K and T type thermocou-
ples. Connect each probe to an input socket, as shown below. The logger will recognise which chan-
nels are being used. If no probes are connected, the Squirrel will not start logging.
Note: T type thermocouples are software controlled and only available when used with SquirrelView
or PaintView software.
Note: Each plug has a wide terminal and a narrow terminal. Ensure that the plug is orientated cor-
rectly before making the connection.
EN
To confirm which probes are connected, press the button on the logger until the METER
Func
function is displayed:-
Repeatedly press the button to view each probe in turn.
Sel
28123 Version 10
Page 4
www.grantinstruments.com