Fig. B
Charging the Battery (Fig. C)
WARNING:
supplied charger.
From new, the rechargeable cells of the product need a
minimum charge time of 16 hours to ensure full power.
•
Plug the jack plug of the charger into the charging
socket
of the tool as shown in Fig. C. Plug the
10
charger into any standard 120 Volt 60 Hz electrical
outlet. The charging indicator
nOTE : If the charging indicator
plug is inserted remove the jack plug from the charging
socket
10
and complete the following steps:
1. Check the beater bar for hair ingress or any other signs
of stalling and remove the offending items. Insert the
jack plug into the charging socket
indicator
still fails to be lit remove the jack plug and
12
complete step 2 below.
2. Operate the on/off switch
the jack plug into the charging socket
If the charging indicator still fails to be lit then return the
unit to an authorized service center.
3
4
5
6
7
For use only with the
will be lit.
12
12
is not lit when the jack
, if the charging
10
1
once and then re-insert
10
.
Fig. C
While charging, the charger may get warm, this is perfectly
normal and safe. It is safe to leave the appliance connected
to the charger indefinitely. The charger automatically
reduces power consumption when charging is complete.
•
When charging is complete, the LED will turn off.
WARNING:
at ambient temperatures below 39 °F (4 °C) or above
104 °F (40 °C).
Switching On and Off (Fig. D)
•
To switch the appliance on, depress the on/off
button
with your foot
1
•
To switch the appliance off, depress the button again.
Fig. D
EMPTYING AND CLEANING THE PRODUCT
WARNING:
emptying the dust bin or cleaning.
Opening the Dust Bin (Fig. E)
•
Hold the sweeper over a garbage can.
•
Simultaneously press both dust bin release tabs
door of the dust bin
9
will drop open, releasing the dust and dirt.
Fig. E
•
Close the dust bin door until the two release tabs click
into place.
English
12
10
Do not charge the battery
Turn sweeper off before
underneath the sweeper head
. The
8
2
3