THOMSON DS500 Instructions D'utilisation page 21

B. Pairing with a Bluetooth stereo transmitter
Different Bluetooth transmitters have different pairing ways. Please refer to the user manual of your
Bluetooth transmitter for further information. The general pairing steps are as follows:
1. Keep DS500 and Bluetooth transmitter within 1 meter when pairing.
2. Press button, and press the SOURCE to select the Bluetooth mode.
3. Switch on your Bluetooth transmitter and let it enter pairing mode.
4. The transmitter will search and connect with DS500 automatically. After successful connecting, the
Bluetooth voice will change when connected successfully.
Remarks:
DS500 will return to pairing mode automatically after disconnecting from a Bluetooth device.
C. Music Playback
Connecting with a A2DP cell phone or Bluetooth transmitter
1. Connect your cell phone or Bluetooth transmitter with DS500.
2. You can listen to your music from DS500 now when playing it back.
3. Press VOL+ to turn up the volume, press VOL– to turn down the volume.
4. Press to skip to the previous song.
5. Press to skip to the next song.
Play music via NFC
NFC (Near Field Communication) is a technology that enables short-range wireless communication
between NFC-enabled devices, such as mobile phones.
What you need
• Bluetooth device with NFC function.
• For pairing, tap the NFC device on the NFC tag of this product, less than 2cm distance.
• The operational range between the main unit (left and right speakers) and a NFC device is
approximately 10 meters (30 feet).
1. Enable NFC on your Bluetooth device (see the user manual of your device for details).
2. Tap the NFC device on the NFC tag of this product until you hear a beep sound from this product.
» The NFC device is connected to this product via Bluetooth.
3.
» To break the connection, tap the NFC device with the NFC tag on this product again.
- EN 9 -