Umarex LaserLiner MoistureMaster Compact Plus Mode D'emploi page 22

To access the menu, simultaneously press and hold the two arrow buttons in
the "measured value" display. Press the "MODE" button to set the value for
"dry" (Dry Limit). Press "MODE" again to set the value for "wet" (Wet Limit).
2 sec
12
AutoHold
The AutoHold function is activated as standard and can be deactivated in
the menu. With AutoHold activated, as soon as the measured value is stable
it is automatically held on the display. This status is signalled acoustically
and indicated by a symbol on the display. With AutoHold deactivated, the
measured value is continuously updated on the display.
2 sec
!
Tip: The AutoHold function is suitable for measurements with no
movement. Switch off the AutoHold function for scanning walls.
22
EN
Language
ENGLISH
DRY limit
100
WET limit
400
AutoHold
3x
– +
– +
Ein
Wood
Teak