helpful user tips
Clearing a Jam
If paper is not inserted properly into the shredder, or if the sheet capacity is exceeded, a jam
may result. Move the switch to the REVERSE (<<) position, and remove the excess paper from
the top and pull it out. TO PREVENT ANY INJURIES, DO NOT PLACE YOUR HANDS NEAR THE
FEED OPENING. Once the paper is cleared, normal shredding operation can resume. If the
shredder jams while in reverse, press the switch to the AUTO position and let shredder run to
clear the jammed paper. If jam does not clear, slide the switch back and forth between the REV
and AUTO until the jam is cleared. If the jam cannot be cleared following this procedure, unplug
the unit and carefully remove the jammed paper manually.
Overheating
If your shredder overheats, the unit will automatically shut off and all functions will cease in
order to protect the motor. Turn off and unplug the shredder from the outlet. Allow enough
time for the motor to cool down. The shredder will not resume normal function until the
temperature of the motor cools down to a safe temperature. Once cool, plug the shredder
back into the outlet, turn the unit back on and resume normal operation. Make sure to empty
waste basket to avoid overloading the basket and damaging the
cutting mechanism.
Bin Full Function
Some shredders are equipped with a mechanical or optical Bin Full sensor. When the
basket becomes full, the shredder will cease operation. Empty basket to resume operation.
Emptying Basket
Always turn the shredder off and unplug the power cord from the AC outlet before cleaning
it, moving it, or emptying the wastebasket. Always keep wastebasket emptied so that the
shredder's output is not impeded. Never let the wastebasket get full. This will
lead to shredded material being pulled back up into the shredder and cause jams.
Staples and Paperclips
This shredder will safely shred standard staples and small paperclips. Industrial or non-
standard, large size staples, jumbo and/or butterfly paperclips, and binder clips should NEVER
be shredded. Please remove from paper before shredding.
10