Product Description; Prior To First Use - tomado TWD2501B Mode D'emploi

1. ON/OFF button with indicator led
2. Extra indicator led (blue/green)
3. Lid
4. Water reservoir
5. Water level indicator
6. Bottom plate
7. Drip tray height adjustment
8. Drip tray
9. Cup grille
10. Water outlet
11. Reset button (top right in the recess at the front)
12. Rubber cap for water drain (bottom side)
13. Water filter
12
Before using the hot water dispenser for the first time, proceed as follows: carefully unpack the appliance and remove all
packaging material as well as any promotional stickers. Keep the packaging (plastic bags and cardboard) out of reach of children.
After unpacking the appliance, carefully check it for external damage that may have occurred during transport.
Place the hot water dispenser on a flat, heat-resistant surface.
Check that the voltage stated on the information plate matches the voltage used in your region. Insert the plug of the hot water
dispenser in a suitable wall socket.
Caution: This appliance does not have a separate switch that allows you to switch the power supply to the appliance on or off.
When the plug is in the socket, the appliance is connected directly to the mains voltage and ready for use. Always first remove
the plug from the socket and allow the appliance to cool before cleaning it or performing maintenance.
Placing the drip tray
The drip tray can be snapped in place in two positions. The top position is for cups and glasses. The bottom position is for large
mugs and jugs. First, snap the drip tray in place in the bottom position, to be able to rinse the appliance more easily.

PRODUCT DESCRIPTION

13

PRIOR TO FIRST USE

EN - 12
1
2
10
11
3
4
5
6
7
8
9