Detail/Movement Button; Line Quality Indicator; Brightness Adjustment - Vialta Beamer BM-80 Mode D'emploi

Detail/Movement Button

The DETAIL/MOVEMENT button adjusts the sharpness of the video you see. It is
a balance between detail and movement. Press the DETAIL side of the button to
increase picture sharpness. Press the MOVEMENT side of the button to see more
fluid motion.
When you press the DETAIL/MOVEMENT button, an indicator bar shows the
current setting.

Line Quality Indicator

The quality of your video call depends on the quality of your phone line. A blinking
red "Line" will appear in the upper, right hand corner of the screen if the line quality
drops by more than 10%. If the Line Quality Indicator appears frequently, you may
want to try your call again or have your phone line tested by your local carrier.
When the line quality drops too low to support a video call, Beamer will
automatically attempt to improve the connection, which may take up to 20
seconds. During this time a beep and a "Please wait" message will be heard. If the
connection has improved enough to support a video call, a second beep will be
heard and you may continue your video call. However, if the connection still
cannot support a video call, Beamer will display "Line condition cannot support
video. Returning to voice only call. Press Start/Views button to try video again". At
this time, you may continue a voice only call or try to establish a video call again
by pressing the START/VIEWS button.

Brightness Adjustment

You can adjust the brightness of the picture with the scroll wheel on the back of
your Beamer.
Adjust video
Line
10