Taurus AP2030 Mode D'emploi page 8

Masquer les pouces Voir aussi pour AP2030:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 9
- The plug must be easily accessible so it can be
disconnected in an emergency.
INSTRUCTIONS FOR USE
BEFORE USE:
- Make sure that all the product's packaging has
been removed.
- Remove the appliance's protective film and
follow figure 1.
- To eliminate the smell given off by the appli-
ance when used for the first time, it is recom-
mended to have it on at full power for 2 hours in
a well-ventilated room.
- Prepare the appliance according to the function
you wish to use.
USE:
- Extend the cable completely before plugging
it in.
- Attach the appliance to its base / connector
making sure that it is correctly fitted into place.
- Connect the appliance to the mains.
- Turn the appliance on, by using the on/off
button.
ELECTRONIC SPEED CONTROL:
- The speed of the appliance can be regulated
by using the speed regulator control (C). This
function is very useful, as it makes it possible
to adapt the speed of the appliance to the type
of work that needs to be done.
TIMER FUNCTION:
- The appliance's operating time can be con-
trolled.
- To program the operating time simply select it
using the (B) button.
- The time programmed or remaining time will
appear on the display.
FILTER BUTTON:
- When the filter life expires (about 2200hr), the
filter replacement indicator (light bar will light
in red) to remind you, it is high time to change
the filter.
- Please replace the filter consulting figure 1.
- After changing the filter, hold the "ON/OFF"
button for 7 seconds to reset.
NIGHT LIGHT BUTTON:
- Light bar has 3 positions: Soft, standard, off.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
- Turn the appliance off, using the on/off button.
- Unplug the appliance from the mains.
CLEANING
- Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
- Clean the electrical equipment and the mains
connection with a damp cloth and dry. DO
NOT IMMERSE IN WATER OR ANY OTHER
LIQUID.
- Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
- Do not let water or any other liquid get into the
air vents to avoid damage to the inner parts of
the appliance.
- Never submerge the appliance in water or any
other liquid or place it under running water.
- Do not wash the filter.
- Do not use a vacuum cleaner to clean the filter.
- Sterilize the filter under sunlight regulary.
- If the appliance is not in good condition of
cleanliness, its surface may degrade and
inexorably affect the duration of the appliance's
useful life and could become unsafe to use.
SUPPLIES
- Supplies can be acquired from distributors and
authorised establishments (such as filters, etc.)
for your appliance model.
SPECIFICATIONS:
- Protection degree: IPX0
- Applied part type: BF
- Weight: 2,07 Kg
- Acoustic pressure level < 60 dB(A)
- Vibration < N/A m/s2
- Operating temperature: 0°C~35°C
- Storage temperature: -15°C~35°C~
NB: These specifications are subject to change
without notice of purpose of improvement.

Publicité

Table des Matières
loading

Table des Matières